1" Edge-driven UHF dome tweeter with in-line crossover and I-mount tweeter mounting system including new Starfish OEM factory tweeter location mounting adapters.

Edge-driven UHF dome- These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. I-Mount (patent no. 5,859,917) tweeter mounting system - This well-thought-out system allows for easy and versatile installation of tweeters in each of the Infinity component system. New for 2005 is the Starfish, an accessory that allows for mounting in factory tweeter locations.

SPECIFICATIONS
Power Handling, RMS 50 Watts with supplied crossover
Power Handling, Peak 150 Watts with supplied crossover
Sensitivity 93dB
Frequency Response 3.5kHz - 35kHz
Mounting Depth 3/4"
Impedance 2 Ohms

SPECIFICATIONS
Power Handling, RMS 350 Watts
Power Handling, Peak 1400 Watts
Sensitivity 89dB
Impedance 1 or 4 Ohms
Mounting Depth 4-3/4" (121mm)

SPECIFICATIONS
Power Handling, RMS 350 Watts
Power Handling, Peak 1400 Watts
Sensitivity 87dB
Impedance 2 or 8 Ohms
Mounting Depth 4-3/4"

12" Selectable Impedance Subwoofer, 1 or 4 ohms

Woven Glass-Fiber Cone - This cone material is extremely stiff, minimizing cone flex; this results in very low distortion and improved clarity that Infinity trademarks. Selectable Impedance - This provides easy configuration of the voice coils. No more confusing series and parallel connections of voice coils and easier connection for multi-subwoofer systems. Neodymium motor with aluminum heatsink - Aluminum extrusion provides a heatsink for the motor's steel parts. Neodymium provides more magnetic energy in a smaller space, which reduces overall weight, and is inherintly magnetically shielded. 3-inch diameter voice coils - This larger than typical surface area provides better thermal power handling than smaller sized voice coils. Vented Polepiece - Reduces air compression under the dustcap which minimizes mechanical noise and provides more constant mechanical Q for reduced distortion. Medium Q Design - Provides great performance in sealed, vented or bandpass enclosures. Sealed enclosures for Kappa woofers can be + or - 30% of the recommended volume. Optimum vented boxes do not require super-long ports.

SPECIFICATIONS
Power Handling, RMS 350 Watts
Power Handling, Peak 1400 Watts
Sensitivity 92dB
Impedance 1 or 4 Ohms
Mounting Depth 5" (127mm)

12" Selectable Impedance Subwoofer, 2 or 8 ohms

Woven Glass-Fiber Cone This cone material is extremely stiff, minimizing cone flex; this results in very low distortion and improved clarity that Infinity trademarks. Selectable Impedance - This provides easy configuration of the voice coils. No more confusing series and parallel connections of voice coils and easier connection for multi-subwoofer systems. Neodymium motor with aluminum heatsink - Aluminum extrusion provides a heatsink for the motor's steel parts. Neodymium provides more magnetic energy in a smaller space, which reduces overall weight, and is inherintly magnetically shielded. 3-inch diameter voice coils - This larger than typical surface area provides better thermal power handling than smaller sized voice coils. Vented Polepiece - Reduces air compression under the dustcap which minimizes mechanical noise and provides more constant mechanical Q for reduced distortion. Medium Q Design - Provides great performance in sealed, vented or bandpass enclosures. Sealed enclosures for Kappa woofers can be +or - 30% of the recommended volume. Optimum vented boxes do not require super-long ports.

SPECIFICATIONS
Power Handling, RMS 350 Watts
Power Handling, Peak 1400 Watts
Sensitivity 90dB
Impedance 2 or 8 Ohms
Mounting Depth 5"

SPECIFICATIONS
Power Handling, RMS 35 Watts
Power Handling, Peak 105 Watts
Sensitivity 92dB
Frequency Response 85Hz - 25kHz
Mounting Depth 1-5/8"
Impedance 2 Ohms

4" 2-Way car audio loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD-dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 42.9i utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 50 Watts
Power Handling, Peak 150 Watts
Sensitivity 93dB
Frequency Response 75Hz - 25kHz
Mounting Depth 1-13/16"
Impedance 2 Ohms

SPECIFICATIONS
Power Handling, RMS 60 Watts
Power Handling, Peak 180 Watts
Sensitivity 94dB
Frequency Response 75Hz - 25kHz
Mounting Depth 1-7/8"
Impedance 2 Ohms

5-1/4" 2-way car audio loudspeaker with Plus One woven glass fiber woofer cone and edge-driven MMD®-dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 52.9i utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 55 Watts
Power Handling, Peak 165 Watts
Sensitivity 94dB
Frequency Response 55Hz - 25kHz
Impedance 2 Ohms
Mounting Depth 2-3/16"

6-1/2" two-way component system with outboard crossover and I-mount tweeter mounting kit including Startfish OEM adapter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven UHF dome tweeter - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. This brand new Infinity tweeter delivers flawless output to 35kHz, ensuring reproduction of every last detail. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa component system features a user adjustable tweeter level control on the passive corssover.

SPECIFICATIONS
Power Handling, RMS 90 Watts
Power Handling, Peak 270 Watts
Sensitivity 95dB
Frequency Response 45Hz - 25kHz
Mounting Depth 2-7/16"
Impedance 2 Ohms

6-1/2" 2-way car audio loudspeaker with Plus One® woven- glass-fiber-woofer cone and edge-driven MMD®-dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 62.9i utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Intermount III mounting system - Allows for installation of the 62.9i in all 6-1/2" hole size standards without the need to purchase additional adaptors or mounting kits. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level -Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 95dB
Frequency Response 45Hz - 25kHz
Mounting Depth 2-3/16"
Impedance 2 Ohms

6-1/2" three-way loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD dome midrange and UHF tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome midrange - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. UHF Tweeters - To ensure response clear out to 30kHz, both three-way multielements use a UHF super tweeter. Adjustable tweeter level-Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 95dB
Frequency Response 45Hz - 30kHz
Impedance 2 Ohms
Mounting Depth 2-5/16"

165mm two-way loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 652.9i utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level -Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 95dB
Frequency Response 45Hz - 25kHz
Impedance 2 Ohms
Mounting Depth 2-3/8"

6" x 8" (5" x 7") two-way component system with outboard crossover and I-mount tweeter mounting kit including Startfish OEM adapter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven UHF dome tweeter - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. This brand new Infinity tweeter delivers flawless output to 35kHz, ensuring reproduction of every last detail. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa component system features a user adjustable tweeter level control on the passive corssover.

SPECIFICATIONS
Power Handling, RMS 90 Watts
Power Handling, Peak 270 Watts
Sensitivity 93dB
Frequency Response 40Hz - 25kHz
Mounting Depth 2-1/2"
Impedance 2 Ohms

6" x 8" (5" x 7") two-way loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 682.9cf utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level -Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 100 Watts
Power Handling, Peak 300 Watts
Sensitivity 94dB
Frequency Response 40Hz - 25kHz
Mounting Depth 2-7/16"
Impedance 2 Ohms

6" x 9" 2-way car audio loudspeaker with Plus One® woven- glass-fiber-woofer cone and edge-driven MMD®-dome tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome tweeters - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Unipivot - To ensure proper imaging the 692.9i utilizes a patented rotating tweeter (patent no. 6,002,780). So even if the speaker is mounted down low in the door, the soundstage can be brought up and optimized for the listener's location. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. Adjustable tweeter level-Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 110 Watts
Power Handling, Peak 330 Watts
Sensitivity 96dB
Frequency Response 35Hz - 25kHz
Impedance 2 Ohms
Mounting Depth 3-1/4"

6" x 9" three-way loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD dome midrange and UHF tweeter.

Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. Edge-driven MMD dome midrange - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. True Four Ohms— All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accuracy. UHF Tweeter - To ensure response clear out to 30kHz, both three-way multielements use a UHF tweeter. Adjustable tweeter level-Each Kappa multielement features a user adjustable tweeter level control. On the two-way models, simply rotate the tweeter to add or subtract 3dB output. On the three-way models, it is the simple push of a button right on the tweeter faceplate.

SPECIFICATIONS
Power Handling, RMS 110 Watts
Power Handling, Peak 330 Watts
Sensitivity 96dB
Frequency Response 35Hz - 30kHz
Mounting Depth 3-1/4"
Impedance 2 Ohms

• Deep-anodized-aluminum woofer cone ensures incredible detail and accuracy. This material holds its shape regardless of output level, unlike more commonly used materials, such as polypropylene.
• An incredible 1" deep-anodized-aluminum tweeter with rubber surround is used in the Perfect 5.1 to deliver incredble accuracy and detail. In addition, this edge-driven dome tweeter will handle plenty of power, making the 5.1 a great choice for the enthusiast looking for a system that will sound every bit as good at high output levels as at moderate ones.
• A precision outboard crossover using a Linquitz-Riley acoustic alignment is used to precisely divide frequencies between the mid-woofer and tweeter. The tweeter crossover frequency is set at 3.5kHz, facilitating exceptional mid-woofer to tweeter transition. This well-executed crossover also provides the ability to adjust tweeter level, allowing you to maximize system performance and imaging based on location
• I-Mount™ (patent no. 5,859,917) tweeter-mounting system – This patented mounting system facilitates effortless flush, angled,or surface mounting of the component system tweeters.

SPECIFICATIONS
Power Handling, RMS 100 Watts
Power Handling, Peak 400 Watts
Frequency Response (±3dB) 80Hz - 23kHz
Sensitivity 89dB Impedance 4 Ohms
Crossover Frequency(ies) 3.5kHz, 24dB/oct
Mounting Depth 2-1/4" Perfect Mid-woofer, 1" Perfect tweeter

New Ceramic Metal Matrix woofer cone ensures incredible detail and accuracy even at high output. Die-cast woofer basket with vented and flared polepiece precisely aligns the motor structure.

• Deep-anodized aluminum woofer cone ensures incredible detail and accuracy. This material holds its shape regardless of output level, unlike more commonly used materials, such as polypropylene.
• A precision outboard crossover using a Linquitz-Riley acoustic alignment is used to precisely divide frequencies between the mid-woofer and tweeter. The tweeter crossover frequency is set at 3.5kHz, facilitating exceptional mid-woofer to tweeter transition. This well-executed crossover also provides the ability to adjust tweeter level, allowing you to maximize system performance and imaging based on location.
• An incredible 1" deep anodized aluminum tweeter with rubber surround is used in the Perfect 6.1 to deliver incredible accuracy and detail. In addition, this edge-driven dome tweeter will handle plenty of power, making the 6.1 a great choice for the enthusiast looking for a system that will sound every bit as good at high output levels as at moderate levels.
• I-Mount™ (patent # 5,859,917) Tweeter Mounting System - This patented mounting system facilitates effortless flush, angled, or surface mounting of the component system tweeters.

SPECIFICATIONS
Power Handling, RMS 100 Watts
Power Handling, Peak 400 Watts
Frequency Response (±3dB) 75Hz - 23kHz
Sensitivity 90dB
Impedance 4 Ohms
Crossover Frequency(ies) 3.5kHz, 24dB/oct
Mounting Depth 2-3/4" Perfect Mid-woofer, 1" Perfect tweeter